Search results

Auction Location: 8370 W. 35W Service Drive NE Blaine, MN 55449 Unless noted otherwise in item descriptions. Items at "offsite" locations must be removed within the scheduled removal period. Rigging information will be posted on larger items. Buyers must hire a licensed and insured rigger for these items (Normally the posted rigger per the sellers request). All payments must be made at our office. Payments will not be accepted at "offsite" locations. UPS shipping and LTL are not available for offsite items. Associated Fees: Buyers Premium: 15% Sales Tax::8.375% Credit Card Fee: 4% Payment can be made onsite by Cash, Credit, Check (Checks over $2000 will not be accepted without a Bank Letter of Guarantee), Wire (Buyer Must Add $15 for Transfer Fee),  Wire Transfer instructions will be sent via email (Please check your spam/junk folders if not received by 3:00 pm of closing day).  Auction Preview: Wednesday, March 25th from 8:00 am to 3:00 pm or daily by appointment only. Auction Closing: Thursday, March 26th Beginning at 10:00 am This auction will close at a rate of (5) lots per minute with 1 minute extended bidding. Auction Checkout: (Closing times are sharp) Monday, March 30th from 8:00 am to 3:30 pm  Tuesday, March 31st from 8:00 am to 3:30 pm  Wednesday, April 1st from 8:00 am to 3:30 pm Payment and removal is due by 3:30 pm of Wednesday, April 1st. We will process all outstanding invoices at the conclusion of the scheduled removal period, including a 4% credit card fee.  Rigging: Larger items requiring a forklift to load will display a loading fee. This fee will not be added to your invoice. Please add any loading fees to your total if you require this service. We ask that buyers bring appropriate trailers/transportation for their purchases. Excessive strapping, blocking, disassembly will result in increased loading fees. Buyers are free to load their purchases at our facility using non-powered equipment but must bring their own help as auction staff will not assist. Buyers will be responsible for any damages/injuries caused while loading their own purchases. Ground level removal only. Plan accordingly. Shipping: Available for "Hand Carry" Type Items Only.  Email: jim@premiermachineryauctions.com to arrange shipping. Make sure to include your Invoice number and mailing address if different from your address on file. Pay your invoice immediately if you'd like your items shipped. Your card on file will be charged for UPS shipping charges and any BTO fees once your items have been packaged. An additional UPS pickup fee will be added to any declined or expired cards. Please allow up to (7) business days after the final day of checkout for packaging to be completed. You will receive tracking info via email and text through Quantum Ship once your packages have been picked up. UPS Shipping can be expensive and higher than expected UPS shipping costs do not absolve you from completing this transaction. We do not provide shipping estimates. Please use any posted weights/dimensions to calculate shipping costs if desired. Insurance will be added automatically to all invoices over $300. The posted Fees/Dates/Times are Non-Negotiable. DO NOT BID if You are unable to abide by any of the posted details. Failure to pay for and/or pick up your items will result in an irrevocable permanent ban from all future auctions. All items are sold AS IS/WHERE IS and with ALL faults. You are bidding on used equipment. Premier Machinery Auctions makes no claim to working condition/functionality of items whatsoever. We encourage all bidders to utilize the scheduled preview time to make your own determination of item values. Please reach out to the contact below with any questions or clarification of terms. Provided specifications and approximations are subject to bidder verification. Auctioneer: Jim Nelson (612) 991-7008 jim@premiermachineryauctions.com License no. MN 62-25-01

8" Throat, 20" Max Stroke, 1-1/2" x 1-1/2" Ram. Arbor Press Alone Measures: 8-1/2" x 19-1/2" x 36" Not Including Handle. Stand Measures: 21" x 21" x 36-1/2". There is a mandatory $50 loading fee for this item. This item will be loaded as it is shown. This item can be palletized for an additional fee. Contact Blake with TK Rigging @ 612-720-1243 for all rigging related questions.

Table: 42"×9", Approx. Travels: Longitudinal - 24", Cross Slide - 12", Knee - 16", Quill - 5", Power Feeds on all Axis, Variable Speed: 60-4200 RPM, R8 Spindle, DRC 2-Axis DRO, 1-1/2 HP, 230 Volt, 3-Phase, s/n: 181362. Approx. 60"×60"×84" and 2,000 lbs. There is a mandatory $200 loading fee for this item. This item will be loaded as it is shown. This item can be palletized for an additional fee. Contact Blake with TK Rigging @ 612-720-1243 for all rigging related questions.

Pedestal Base, Foot Pedal Control, Overall: 48" x 40" x 60". There is a mandatory $20 loading fee for this item. This item will be loaded as it is shown. This item can be palletized for an additional fee. Contact Blake with TK Rigging @ 612-720-1243 for all rigging related questions.

16" Swing Over Bed, 30" Max Distance Between Centers, Standard and Metric Threading, Approx. 1-1/2" Hole Thru Spindle, (12) Speeds from 55 to 1800 RPM, Taper Attachment, Steady Rest, Faceplate, 8-1/4" 3-Jaw Chuck with Chuck Guard, #3MT Tailstock, Foot Treadle, Change Gear Set, Anilam Wizard 2-Axis DRO, 230 Volt, 3-Phase, s/n: F9003008H, Approx. 72" x 36" x 69" Overall. Click 2nd Photo for Video of this Machine. There is a mandatory $200 loading fee for this item. This item will be loaded as it is shown. This item can be palletized for an additional fee. Contact Blake with TK Rigging @ 612-720-1243 for all rigging related questions.

24" x 28" Adjustable Angle Table, Grob Type RW-B Blade Welder, Shear, and Grinder. 2-Speeds High and Low Range From 40-120 FPM, Up to 1665-5000 FPM. 9" Max Distance to Table Under Blade Guide. 18" Throat, S/N: 5277, 240V. 3 Ph. Overall: 46" x 43" x 75". Note: Stand Alone Blade Welder NOT Included but Can be Found at Lot #256. There is a mandatory $100 loading fee for this item. This item will be loaded as it is shown. This item can be palletized for an additional fee. Contact Blake with TK Rigging @ 612-720-1243 for all rigging related questions.

Approx. 80" Max Distance Between Centers, Inch and Metric Threading, 3" Hole Thru Spindle, (12) Speeds from 40-1600 RPM, 12" 4-Jaw Chuck, Taper Attachment, (2) Steady Rests, 12" 3-Jaw, 17" Faceplate, Newall DP700, 2-Axis DRO, 230 Volt, 3-Phase, s/n: 15E-579, Approx. 141" x 50" x 77" Overall. Note: Tooling Shown on the Back is NOT Included. Click 2nd "Photo" for Video of this Machine. There is a mandatory $300 loading fee for this item. This item will be loaded as it is shown. This item can be palletized for an additional fee. Contact Blake with TK Rigging @ 612-720-1243 for all rigging related questions.

Table: 74"×36", Spindle Diameter: 4", Spindle Taper: NMTB-50, (25) Speeds from 13-1500 RPM, Anilam Wizard 3-Axis DRO, Approx. Travels: Cross Table: 60", Saddle: 54", Vertical: 60", Manual Feed Spindle: 24", Pendant Control, Assorted Tooling as Shown, 220 Volt, 3-Phase, s/n: Difficult to Read, See Photo. Approx. 112"×174"×120"and Approx. 38,000 lbs. Note: A fully refundable $1,000 fee will be added to your invoice. This fee will be refunded at the time of complete removal of this machine and all items included with this lot.  Click 2nd "Photo" for Video of this Machine.   Removal must be completed by a licensed and insured rigging company at the expense and scheduling of the buyer. Rigging company must provide proof of liability insurance of at least $2,000,000 prior to removal. Riggers with Insurance on file with PMA: R&R Machinery Movers 651-457-0227 Fehn Rigging and Transfer 320-447-5212 Quickway Rigging 763-784-4295

240V. 3 Ph. Overall: 34" x 34" x 69-1/2". There is a mandatory $20 loading fee for this item. This item will be loaded as it is shown. This item can be palletized for an additional fee. Contact Blake with TK Rigging @ 612-720-1243 for all rigging related questions.

Table: 42"×9", Approx Travels: Longitudinal - 24", Cross Slide - 12", Knee - 16", Quill - 5", Power Feeds on all Axis, Variable Speed: 60-4200 RPM, R8 Spindle with Kurt Automatic Power Drawbar, Digital Readout, 1-1/2 HP, 230 Volt, 3-Phase, s/n: 174811. Approx. 60"×60"×84" and 2,000 lbs. There is a mandatory $200 loading fee for this item. This item will be loaded as it is shown. This item can be palletized for an additional fee. Contact Blake with TK Rigging @ 612-720-1243 for all rigging related questions.

42" Capacity in 16 Ga. Steel, Foot Treadle, Approx. 50" x 24" x 39". There is a mandatory $100 loading fee for this item. This item will be loaded as it is shown. This item can be palletized for an additional fee. Contact Blake with TK Rigging @ 612-720-1243 for all rigging related questions.

14" x 23-5/8" Electromagnetic Chuck, Coolant Tank with Pump and Paper Type Filter, 3.7 KW, 230 Volt, 3-Phase, s/n: 73126, Approx. 125" x 88" x 96" Overall. Click 2nd Photo for Video of this Grinder. There is a mandatory $300 loading fee for this item. This item will be loaded as it is shown. This item can be palletized for an additional fee. Contact Blake with TK Rigging @ 612-720-1243 for all rigging related questions.

16" x 10" Adjustable Angle Table w/ Fence, 1 HP, 1725 RPM, 115V. Overall: 25" x 21" x 50-1/2". There is a mandatory $20 loading fee for this item. This item will be loaded as it is shown. This item can be palletized for an additional fee. Contact Blake with TK Rigging @ 612-720-1243 for all rigging related questions.

24-5/8" x 8-1/4" Electromagnetic Chuck, Coolant Tank with Pump and Paper Type Filter, 230 Volt, 3-Phase, Approx. 80" x 51" x 68" Overall. Click 2nd "Photo" for Video of this Grinder. There is a mandatory $100 loading fee for this item. This item will be loaded as it is shown. This item can be palletized for an additional fee. Contact Blake with TK Rigging @ 612-720-1243 for all rigging related questions.

Mounted to Steel 10" x 11-1/2" x 3/4" Steel Plate with 1-3/4" Post For Mounting Into Welding Table.

EZ Trak SyncMaster 153T Control, R8 Spindle with Kurt Automatic Power Drawbar, 48"×9" Table, Travels: Longitudinal - 30", Cross Slide- Min. 8.75" Max. 20.75", Chrome Ways, Includes Manuals, 2 HP, 230 Volt, 3-Phase, s/n: BR 265542E, Approx. 72"×69"×85". Note: Due to Undiagnosed Issue, we were unable to "Home" this machine for a video. There is a mandatory $200 loading fee for this item. This item will be loaded as it is shown. This item can be palletized for an additional fee. Contact Blake with TK Rigging @ 612-720-1243 for all rigging related questions.

Bridgeport BPCG Controls, 6" x 18" Permanent Magnetic Chuck, Coolant Tank and Pump, 2.5 HP, 230 Volt, 3-Phase, Approx. 82" x 62" x 80" Overall. Click 2nd Photo for video of this Grinder. There is a mandatory $200 loading fee for this item. This item will be loaded as it is shown. This item can be palletized for an additional fee. Contact Blake with TK Rigging @ 612-720-1243 for all rigging related questions.

with Plasma Gun, Ground Clamp Cable, and Inline Pneumatic Die Grinder. Plasma Cutter Measures: 11" x 21" x 17", Cart Measures: 20" x 38" x 37". 240V. 3 Ph. Cutter Input.

72" x 16 Ga. Capacity, 9" Throat, 62" Between Uprights, Manual Back Gauge, Foot Pedal, 230 Volt, 3-Phase, s/n: I027, Approx. 80" x 56" x 92" Overall. There is a mandatory $300 loading fee for this item. This item will be loaded as it is shown. This item can be palletized for an additional fee. Contact Blake with TK Rigging @ 612-720-1243 for all rigging related questions.

EZ Trak Phillips Version 3.4 Control, R8 Spindle, 48"×9" Table, Travels: Longitudinal - 30", Cross Slide- Min. 8.75" Max. 20.75", Chrome Ways, Includes Manual, 2 HP, 230 Volt, 3-Phase, s/n: BR 266465E, Approx. 72"×69"×85". Click 2nd "Photo" for Video of this Machine. There is a mandatory $200 loading fee for this item. This item will be loaded as it is shown. This item can be palletized for an additional fee. Contact Blake with TK Rigging @ 612-720-1243 for all rigging related questions.

Drop in Heavy Duty Steel Rolling Frame. 1-3/4" Square Holes, (2) Weldsale Tapered Drift Pins. 33" Height to Table Top. There is a mandatory $100 loading fee for this item. This item will be loaded as it is shown. This item can be palletized for an additional fee. Contact Blake with TK Rigging @ 612-720-1243 for all rigging related questions.

Model BPO-414-6, 3", 4" and 5" Die Widths, s/n: 322518-M, Approx. 94" x 36" x 58" Overall. There is a mandatory $200 loading fee for this item. This item will be loaded as it is shown. This item can be palletized for an additional fee. Contact Blake with TK Rigging @ 612-720-1243 for all rigging related questions.

9" x 16" Capacity @ 90 Degrees and 9" x 8" Capacity @ 45 Degrees (Rectangle), 10.75" Capacity @ 90 Degrees and 8" Capacity @ 45 Degrees (Rounds), Variable Speeds of 105-275 FPM, 158" Blade Length, 1.5 KW, 220 Volt, 3-Phase, s/n: 527-991066, Approx. 96" x 45" x 60" and Approx. 1100 lbs Overall. Click on 2nd Photo for Machine Video. There is a mandatory $200 loading fee for this item. This item will be loaded as it is shown. This item can be palletized for an additional fee. Contact Blake with TK Rigging @ 612-720-1243 for all rigging related questions.

Capacities: Angle, 3" x 3" x 5/16". Flat Bar, 3/8" x 14" x 1/2" x 10" and 5/8" x 6". Punch, 42-Ton, s/n: 3PN2343, 230 Volt, 3-Phase, Approx. 45" x 43" x 64" Overall. Click on 2nd Photo for Machine Video. There is a mandatory $200 loading fee for this item. This item will be loaded as it is shown. This item can be palletized for an additional fee. Contact Blake with TK Rigging @ 612-720-1243 for all rigging related questions.

16" Blade Capacity, 10 HP, 220 Volt, 3-Phase, Approx. 28" x 46" x 67" Overall. There is a mandatory $50 loading fee for this item. This item will be loaded as it is shown. This item can be palletized for an additional fee. Contact Blake with TK Rigging @ 612-720-1243 for all rigging related questions.